Timeout so be sure to turn the controller off when you’re not going to be using it for a while. Pressing and holding this button will shut the controller down - at the moment there’s no This will persist across reboots, so from now on you can just connect by pressing the PSīutton on the controller. If a new device has appeared here then congratulations, you have successfully paired yourĭongle and SixAxis controller. Next we need to configure the bluetooth software on the Pi to accept connections from the controller.ĭisconnect your controller from the USB port, and run the ‘bluetoothctl’ command as a regular user (you don’t need to TheĮxample above shows that no change has been made, as this particular controller had been paired with the dongle before,īut you should see two different addresses - the first is the address the controller was trusting, the second is the one The controller will nowĪttempt to connect to your bluetooth dongle when you press the PS button (don’t do this just yet, it won’t work). Specify the address to which it should change, the default with no arguments is to use the first installed bluetoothĪdapter, which is what you want unless for some reason you’ve got more than one plugged in).
You should see a message indicating that the bluetooth master address on the controller has been changed (you can
0 kommentar(er)
